Sportage 4WD 2Dr L4-2.0L (2002)
Blower Motor: Service and Repair
Blower/Evaporator Unit
Blower / Evaporator Unit
Removal
1. Chock wheels.
2. Disconnect the fresh air/recirculation control cable from the blower housing unit inlet duct.
3. Disconnect five connectors at the bottom of the blower housing unit.
4. Pull carpeting away from bulkhead to gain access.
5. Remove the four nuts retaining the cover plate.
6. Remove the cover plate.
7. Remove two mounting bolts at the top of the blower housing unit.
8. Remove two nuts attaching the bottom of the blower housing unit to the bulkhead mounting studs.