Remove oil pump and oil pressure relief valve – procedure
ENGINE
OVERHAUL
31
TIMING BELT REAR COVER AND OIL PUMP
Timing belt rear cover - remove
1. Remove timing belt, tensioner and gears.
2. Remove fuel injection pump.
3. Remove sump and oil pick-up pipe.
4. Using sequence shown, progressively slacken
then remove bolts securing timing belt rear
cover; remove cover.
5. Remove and discard gasket.
6. Remove and discard camshaft and crankshaft
front oil seals.
Oil pump and oil pressure relief valve - remove
Oil pump
1. Make suitable alignment marks between oil
pump and timing belt rear cover.
2. Progressively slacken then remove 7 screws
securing oil pump cover.
3. Remove oil pump cover.
4. Make suitable alignment marks between oil
pump inner and outer rotors and outer rotor
and timing belt rear cover.
