Remove Timing Belt Tensioner & Gears - 300Tdi Engine
ENGINE
4
OVERHAUL
Timing belt tensioner and timing gears - remove
1. Remove crankshaft gear using tools
LRT-12-031 and LRT-12-078, recover
Woodruff key from crankshaft.
2. Remove and discard ’O’ ring.
3. Remove bolt and slotted washer securing
timing belt tensioner pulley, remove pulley
together with tensioner bracket.
4. Recover flanged spacer from idler pulley stud.
5. Remove centre bolt and washer securing
camshaft timing gear, remove gear and hub
plate as an assembly.
NOTE: Later engines are fitted with a
flange head bolt.
CAUTION: Do not remove 3 bolts securing
hub plate to gear.
