Discovery II
FUEL DELIVERY SYSTEM - V8
19-2-14 REPAIRS
9. Remove 6 screws securing fuel pump access
panel to floor.
10. Remove access panel.
11. Clean fuel pump hose connections.
12. Position absorbent cloth to absorb fuel spillage.
13. Disconnect multiplug and fuel hose from fuel
pump housing.
CAUTION: Always fit plugs to open
connections to prevent contamination.
14. NAS models: Disconnect pressure sensor
pipe from fuel pump housing.
CAUTION: Always fit plugs to open
connections to prevent contamination.
15. Use LRT-19-009 to remove locking ring from
fuel pump housing.
16. Remove fuel pump and discard sealing ring.
Refit
1. Clean fuel pump housing and mating face on
fuel tank.
2. Fit new seal to mating face on fuel tank.
3. Fit fuel pump assembly to fuel tank and use
LRT-19-009 to fit locking ring.
4. Connect multiplug and fuel hose to fuel pump
housing.
5. NAS models: Connect pressure sensor pipe to
fuel pump housing.
6. Fit fuel pump access panel and secure with
screws.
7. Reposition carpet.
8. Fit carpet finisher and secure with screws.
9. Fit screw cover.
10. Models with third row seats: Fit and secure
third row seat latch finishers.
11. Fit right hand rear lower quarter trim casing.
REPAIRS, Trim casing - side - loadspace.
12. Models with third row seats: Fit RH third row
SEATS, REPAIRS, Seat - third row.
13. Connect battery earth lead.
14. Fit battery cover and secure with fixings.
