landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

Filler tube - fuel > < Pump - fuel|Page 489
Page 412
background image

FUEL DELIVERY SYSTEM - V8

REPAIRS 19-2-15

Tank - fuel 

$% 19.55.01 

Remove

1. Drain fuel tank. 

 

 + 

 FUEL DELIVERY SYSTEM - V8, 

ADJUSTMENTS, Fuel tank - drain.

2. Raise rear of vehicle.  

WARNING: Do not work on or under a 
vehicle supported only by a jack. Always 
support the vehicle on safety stands.

3. All except NAS models:Release clips 

securing filler and breather hoses. Release 
hoses from filler tube. 

4. NAS models: Loosen securing clip and 

release filler tube from fuel tank.

5. Disconnect fuel tank vent pipe from filler tube. 
6. Support weight of fuel tank underneath cradle. 

7. Remove 2 nuts and 2 bolts securing cradle to 

chassis. 

8. With assistance, lower LH side of fuel tank then 

remove fuel tank from chassis. 

9. Remove cradle from fuel tank. 

Non NAS fuel tank

10. Remove 2 scrivets securing heat shield and 

remove heat shield. 

11. All except NAS models: Release securing clip 

and remove breather hose from fuel tank.

Refit

1. Fit breather hose to fuel tank and secure with 

clip. 

2. Position heat shield and secure with  scrivets. 
3. With assistance, position fuel tank and cradle. 
4. Fit nuts and bolts securing cradle to chassis. 

Tighten bolts to 45 Nm (33 lbf.ft) and nuts to 26 
Nm (19 lbf.ft). 

5. Connect vent hose. 
6. Connect breather and filler hoses and  secure 

with clips. 

Filler tube - fuel > < Pump - fuel|Page 489