300Tdi Discovery
MANIFOLD AND EXHAUST SYSTEM
5
REPAIR
INLET MANIFOLD GASKET - Mpi
Service repair no - 30.15.08
Remove
1. Disconnect battery negative lead.
2. Position absorbent cloth around fuel pipe to fuel
rail union. Unscrew union to relieve fuel
pressure. Re-tighten union.
CAUTION: Plug connections.
3. Release clip and remove air cleaner to throttle
housing hose.
4. Disconnect stepper motor multiplug.
5. Disconnect throttle potentiometer multiplug.
6. Release throttle cable from abutment bracket.
7. Release throttle cable from cam. Remove
coolant bypass hose.
8. Disconnect fuel temperature sensor multiplug.
9. Release clip and disconnect brake servo hose
from manifold.
