300Tdi Discovery
51
REAR AXLE AND FINAL DRIVE
2
OVERHAUL
12. Remove pinion head bearing with service tool
LRT-99-002.
13. Remove bolts and washers securing crown
wheel to differential flange. Remove crown
wheel.
14. Remove differential carrier bearings.
15. Remove circlips and extract differential cross
shaft.
16. Withdraw differential gears and pinions.
17. Clean all components.
INSPECTION
18. Check all bearings for wear and pitting.
19. Check all gears for wear, scuffing, pitting and
damaged teeth.
20. Supplied as matched sets are: crown wheel and
pinion, pinion housing and bearing caps.
ASSEMBLE
Differential gears
21. Fit differential gears to differential housing.
22. Fit differential cross shaft and circlips.
