landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

Radio - Noise With Ignition Switch in Position 1 or 2|Page 12340 > < CD Changer|Locations
Page 1
background image

Radio/Stereo: Customer Interest
Radio - Noise With Ignition Switch in Position 1 or 2

12/31/96

86/20/96/US

SUBJECT: 
PRIDE - Audio Noise - Turn On

MODEL:    
Discovery

AFFECTED VEHICLES:    
LP
LH
LJ

up to TA502787

LD  

DETAIL

Some 1994 and 1995 Discovery models are experiencing noise coming from the radio when it is turned on while the ignition switch is in position I or II.
This problem was resolved by changes to the radio introduced at serial number PPH0024182. The following procedure fixes the problem by replacing
the radio Control head with a modified unit obtained directly from Pioneer (see note below) and should be used if the noise is evident.

NOTE: 

Some radios prior to serial number PPH0024182 may have been updated through the warranty exchange process. Replace the radio only if the noise
is evident.

The diagnostic steps and repair procedures detailed in this bulletin were developed as an element of the Land Rover Way OPERATION PRIDE. This
TIB provides a library location for PRIDE information within the Land Rover North America technical literature system.

ACTION REQUIRED

Upon customer complaint for the symptoms outlined, perform the specified repairs.

PARTS INFORMATION

^

RTC7657 - Pioneer Radio Removal Tool

^

Pioneer Replacement Radio.

Radio - Noise With Ignition Switch in Position 1 or 2|Page 12340 > < CD Changer|Locations