Discovery II (LT) V8-4.0L (2002)
2.
If module is present, Claim Option 1 and go to Install Service Campaign Label.
3.
If modules are not present, perform the following:
^
Carefully remove blanking plate to access wiring for module on each side of vehicle.
^
Pull module connectors through openings.
^
Connect supplied modules to the wiring harnesses.
^
Install modules with "MODE" switch toward the seatbelt. (Figure 1)
^
Install Service Campaign Label.
INSTALL SERVICE CAMPAIGN LABEL
NOTE:
Campaign labels may have multiple Campaign numbers written on them if multiple campaigns are performed at the same time.
1.
Obtain a Campaign label (LRN0002LABEL) and prepare as follows:
a)
Place the label on a hard surface.