Discovery II (LT) V8-4.0L (2002)
Oil Pick Up/Strainer: Service and Repair
Oil Pick-Up Strainer
Service Repair No - 12.60.20
Remove
1. Remove sump gasket. Please refer to: Oil Pan, Engine/ Service and Repair/ See: Oil Pan/Service and Repair
2. Remove 2 bolts and one nut securing oil pick up strainer.
3. Remove oil pick-up strainer.
4. Collect spacer from stud.
5. Remove and discard O-ring.
Refit
1. Clean oil pick up strainer and O-ring recess.
2. Lubricate and fit new O-ring.
3. Locate spacer on stud.
4. Position oil pick-up strainer, fit bolts and tighten to 10 Nm (8 ft. lbs.). Fit nut and tighten to 22 Nm (16 ft. lbs.).
5. Fit new sump gasket.
Disassembly
1. Remove sump gasket.
2. Remove 2 bolts and 1 nut securing oil pick up strainer.
3. Remove oil pick up strainer.