Freelander Service Procedures
AIR CONDITIONING
82-14
REPAIRS
Sensor - refrigerant pressure
$% 82.20.38
Remove
1. Disconnect battery earth lead.
2. Recover refrigerant from A/C system.
RECOVERY, RECYCLING AND
RECHARGING, Refrigerant recovery -
recycling and recharge.
3. Td4 & KV6 models: Remove underbelly panel.
4. Release multiplug from refrigerant pressure
sensor.
WARNING: Under no circumstances should
refrigerant hoses be disconnected without
first discharging the system.
5. Remove refrigerant pressure sensor from A/C
pipe mounting. Use two spanners to avoid
straining A/C pipe mounting.
CAUTION: Before disconnecting or
removing components, ensure the
immediate area around joint faces and
connections are clean. Plug open
connections to prevent contamination.
6. Discard 'O' ring.
Refit
1. Clean refrigerant pressure switch and
surrounding area.
2. Fit new 'O' ring to sensor and tighten to 10 Nm
(7.5 lbf.ft).
3. Fit multiplug to sensor.
4. Td4 & KV6 models: Fit underbelly panel.
5. Recharge A/C system.
RECOVERY, RECYCLING AND
RECHARGING, Refrigerant recovery -
recycling and recharge.
6. Connect battery earth lead.
