Freelander Service Procedures
ENGINE - K SERIES KV6
REPAIRS 12-3-37
25. Remove bolt securing engine earth lead.
26. Disconnect Lucar from starter solenoid.
27. Release 2 gearbox harness multiplugs from
mounting bracket clips and disconnect
multiplugs.
28. Position absorbent cloth around fuel feed pipe
connection to collect spillage.
WARNING: The spilling of fuel is
unavoidable during this operation. Ensure
that all necessary precautions are taken to
prevent fire and explosion.
29. Pull back rubber sleeve on fuel pipe connector,
release connector and disconnect fuel pipe
from fuel rail pipe.
CAUTION: Always fit plugs to open
connections to prevent contamination.
30. Release purge hose from clip.
31. Release and disconnect hose from purge
control valve.
CAUTION: Always fit plugs to open
connections to prevent contamination.
M12 8005
