landrover Workshop Repair Guides

Land Rover Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 178
background image

ENGINE - K SERIES KV6

ADJUSTMENTS

12-3-1

ENGINE - K SERIES KV6

ADJUSTMENTS

Engine oil pressure check

$% 12.90.09.01

Check

1. Remove oil pressure switch.

 

 + 

 ENGINE - K SERIES KV6, REPAIRS, 

Switch - oil pressure.

2. Fit sealing washer from oil pressure switch to 

LRT-12-052/10 oil pressure gauge adaptor.

3. Fit and tighten oil pressure gauge adaptor LRT-

12-052/10 to oil pump housing.

4. Connect oil pressure gauge LRT-12-052C and 

tighten union.

5. Check and if necessary top up engine oil.
6. Start and run engine until normal operating 

temperature is reached.

7. Note oil pressure readings with the engine 

running at idle and at 3000 rev/min.
 

 + 

 GENERAL DATA, Engine - KV6 

Petrol.

8. Switch off engine, unscrew gauge union and 

remove gauge.

9. Remove adaptor.

10. Wipe off oil spillage
11. Fit oil pressure switch.

 

 + 

 ENGINE - K SERIES KV6, REPAIRS, 

Switch - oil pressure.

12. Recheck engine oil and top up if necessary.

ENGINE - K SERIES KV6 > ADJUSTMENTS > Engine oil pressure check

< PREV PAGE NEXT PAGE >