Freelander Service Procedures
ENGINE - K SERIES KV6
ADJUSTMENTS
12-3-1
ENGINE - K SERIES KV6
ADJUSTMENTS
Engine oil pressure check
$% 12.90.09.01
Check
1. Remove oil pressure switch.
ENGINE - K SERIES KV6, REPAIRS,
2. Fit sealing washer from oil pressure switch to
LRT-12-052/10 oil pressure gauge adaptor.
3. Fit and tighten oil pressure gauge adaptor LRT-
12-052/10 to oil pump housing.
4. Connect oil pressure gauge LRT-12-052C and
tighten union.
5. Check and if necessary top up engine oil.
6. Start and run engine until normal operating
temperature is reached.
7. Note oil pressure readings with the engine
running at idle and at 3000 rev/min.
8. Switch off engine, unscrew gauge union and
remove gauge.
9. Remove adaptor.
10. Wipe off oil spillage
11. Fit oil pressure switch.
ENGINE - K SERIES KV6, REPAIRS,
12. Recheck engine oil and top up if necessary.
