Freelander Service Procedures
ENGINE - K SERIES KV6
REPAIRS 12-3-39
37. Raise vehicle on lift.
38. Remove front road wheels.
39. Release stake in drive shaft nuts.
40. With assistant depressing the brake pedal,
remove and discard LH and RH drive shaft
nuts.
41. Remove rear beam.
42. Remove exhaust front pipe.
- K SERIES KV6, REPAIRS, Front pipe - NAS.
43. Raise one rear wheel for rotation of propeller
shaft to access bolts.
44. Reference mark position of viscous coupling
flange to IRD unit flange to aid reassembly.
45. Remove 6 nuts and bolts securing propeller
shaft to IRD drive flange.
46. Release propeller shaft from IRD drive flange
and tie shaft aside.
CAUTION: Care must be taken to support
the Tripode joint when removed from the
IRD unit. To avoid damage to gaiter or steel
can, the joint should not be allowed to fully
extend or be dropped.
47. Drain gearbox fluid.
ADJUSTMENTS, Gearbox fluid - drain &
refill.
48. Drain fluid from IRD.
DRIVE, ADJUSTMENTS, Intermediate
reduction drive (IRD) lubrication system -
drain & refill - NAS.
49. Remove 6 bolts securing RH and LH front
splash shields and remove shields.
50. Remove clips securing brake hoses to RH and
LH damper brackets.
51. Release ABS sensor leads from bracket.
52. Release ABS sensors from RH and LH front
hubs.
M12 6614
