Freelander Service Procedures
FUEL DELIVERY SYSTEM - PETROL
19-2-26 REPAIRS
Sensor - heated oxygen (H02S) - post cat
- K1.8
$% 19.22.71
Remove
1. Raise front of vehicle.
WARNING: Do not work on or under a
vehicle supported only by a jack. Always
support the vehicle on safety stands.
2. Release clips securing gear lever gaiter to
centre console.
3. Disconnect HO2S multiplug from harness.
4. Release grommet and withdraw HO2S harness
multiplug through grommet aperture.
5. Remove HO2S.
Refit
1. Clean HO2S and mating face.
2. Fit HO2S and tighten to 55 Nm (41 lbf.ft) using
tool LRT-19-014.
3. Feed HO2S harness through grommet aperture
and secure grommet.
4. Connect HO2S multiplug.
5. Fit gaiter to centre console and secure with
clips.
6. Remove stand(s) and lower vehicle.
M19 3325
