Freelander Service Procedures
MANIFOLDS & EXHAUST SYSTEMS - K SERIES KV6
OVERHAUL 30-3-25
OVERHAUL
Seals - manifold chamber - up to 03MY
$% 30.15.37.01
Remove
1. Disconnect multiplug from purge control valve.
2. Disconnect small vacuum hose from purge
control valve.
3. Depress locking collar and release vacuum
hose from IACV housing .
4. Disconnect multiplug from IACV.
5. Disconnect multiplug from TP sensor.
6. Depress locking collars and release vacuum/
breather hose from purge control valve and LH
camshaft cover. Release clip securing hose to
'T' piece and remove hose.
7. Depress locking collars and release vacuum/
breather hoses from throttle body, LH and RH
camshaft cover and remove hose.
8. Disconnect multiplugs from VIS motors.
9. Remove 2 screws securing engine harness
brackets to inlet manifold chamber and position
harness aside.
10. Remove 2 bolts securing inlet manifold
chamber rear support brackets to RH camshaft
cover.