Freelander Service Procedures: KV6 NAS - A/C Compressor Heat Shield Repair
MANIFOLDS & EXHAUST SYSTEMS - K SERIES KV6
REPAIRS
30-3-7
Heat shield - A/C compressor - KV6 - NAS
$% 30.10.32
Remove
1. Disconnect battery earth lead.
2. Remove engine acoustic cover.
ENGINE - K SERIES KV6, REPAIRS,
3. Using a 3/8” square drive socket bar, raise
ancillary drive belt tensioner and release drive
belt from alternator pulley.
4. Remove underbelly panel.
5. Remove 3 bolts securing A/C compressor to
fixing brackets and position compressor aside.
6. Remove compressor heat shield.
Refit
1. Clean compressor and mounting bracket
mating faces.
2. Fit compressor heat shield.
3. Position compressor to mounting and align
heat shield. Fit and tighten bolts to 25 Nm (18
lbf.ft).
4. Using a 3/8" square drive socket bar, raise
ancillary drive belt tensioner and fit drive belt to
pulleys.
5. Fit underbelly panel.
6. Fit engine acoustic cover.
ENGINE - K SERIES KV6, REPAIRS,
7. Connect battery earth lead.
M30 1142
