L322 Range Rover Service Procedures
ENGINE - V8
ADJUSTMENTS
12-2-1
Engine - V8
ADJUSTMENTS
Engine oil pressure check
$% 12.90.09.01
Before disconnecting the battery, ensure all text and
cautions in the battery disconnection section are
observed.
GENERAL INFORMATION, Electrical
Check
1. Disconnect battery earth lead.
2. Remove oil pressure switch.
Engine - V8, REPAIRS, Switch - oil
3. Fit LRT-12-052/10 to oil filter housing and fit
LRT-12-052C to LRT-12-052/10, tighten
unions.
4. Check engine oil level, top-up if necessary.
5. Connect battery earth lead.
6. Start and run engine until normal operating
temperature is reached.
7. Note oil pressure readings with the engine
running at idle and at 3500 rev/min.
8. Switch off engine.
9. Disconnect battery earth lead.
10. Remove LRT-12-052C.
11. Remove LRT-12-052/10.
12. Clean oil spillage.
13. Fit oil pressure switch.
Engine - V8, REPAIRS, Switch - oil
14. Check engine oil level, top-up if necessary.
15. Connect battery earth lead.