LR2 (LF) L6-3.2L (2008)
/l6-3.2l/Page-1243006.png)
17.
18. NOTE: Bearing damage is unavoidable during this operation.
Position the wheel knuckle assembly in a press and support on special tool.
Special Service Tools: Remover, Wheel Hub/Bearing
Press the drive flange out of the wheel knuckle assembly using special tool.
Special Service Tools: Remover/Installer, Wheel Hub
19. NOTE: The inner bearing track will remain on the drive flange.
20. Clamp both halves of a suitable bearing separator around the inner bearing track and position the drive flange in a press.
