LR2 (LF) L6-3.2L (2008)
15.
Installation
1. CAUTION: Make sure that the area around the component is clean and free of foreign material.
Install a new O-ring seal to the active on-demand coupling.
2. CAUTION: Make sure that the area around the component is clean and free of foreign material.
CAUTION: Make sure that new bolts are installed.
Align the active on-demand coupling to the differential and tighten the bolts.
Torque:
24 Nm
3. Install the rear differential support bracket.
Torque:
35 Nm
4. Using a transmission jack, carefully raise the assembly.
5. Connect the differential breather lines.
6. Secure the RH inner halfshaft joint to the differential.
7. CAUTION: Make sure that the installation marks are aligned.
CAUTION: Make sure that new bolts are installed.
Install the rear differential front bush retaining bolts.
Torque:
175 Nm
8. CAUTION: Make sure that the installation marks are aligned.
CAUTION: Make sure that new bolts are installed.
Install the rear differential rear bush retaining bolts.
Torque:
110 Nm