LR3/Disco 3
Cowl Side Trim Panel (76.13.27)
Removal
Installation
Published : Feb 28, 2005
1 .
Remove the front scuff plate trim panel. For additional information, refer to
Cowl Side Trim Panel
(76.13.27)
(Section 501-05 )
2 .
Driver side: Remove the footrest trim panel bolt.
Remove the cover.
3 .
Remove the cowl side trim panel.
Driver side: Release the hood release lever.
Release from the 2 clips.
1 .
Install the cowl side trim panel.
Align the hood release lever.
Secure with the clips.
2 .
Driver side: Tighten the footrest trim panel bolt to 5 Nm (4 lb.ft).
Install the cover.
3 .
Install the front scuff plate trim panel. For additional information, refer to
Cowl Side Trim Panel
(76.13.27)
(Section 501-05 )
