LR3/Disco 3
Installation
1 .
Install the clips to the C-pillar upper trim panel.
2 .
Install the C-pillar upper trim panel.
Attach the safety belt.
Secure with the clips.
Install a new Torx screw and tighten to 3 Nm (2 lb.ft).
3 .
Install the upper trim access cover.
4 .
Install the safety belt lower anchor.
Tighten the new Torx bolt to 40 Nm (30 lb.ft).
5 .
Install the door aperture weatherstrip.
6 .
Return the seat backrest to the upright position.