LR3/Disco 3
C-Pillar Upper Trim Panel (76.13.35)
Removal
Published : Jun 16, 2004
1 .
Fold down the rear seat backrest.
2 .
Release the door aperture weatherstrip.
3 .
Release the safety belt lower anchor.
Remove and discard the Torx bolt.
4 .
Release the upper trim access cover.
5 .
Remove the C-pillar upper trim panel.
Remove and discard the Torx screw.
Release the 4 clips.
Release the safety belt from the seat.
6 .
NOTE :
Do not disassemble further if the component is removed for access only.
Remove the 4 clips from the C-pillar upper trim panel.