LR3 (LA) V6-4.0L (2006)
/v6-4.0l/Page-657001.png)
Balance Shaft: Service and Repair
Engine Dynamic Balance Shaft
Service Repair No - 12.65.38
Special Service Tools
Removal
1. Disconnect the battery ground cable.
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
Raise and support the vehicle.
3. Remove the front wheels and tires.
4. Remove the cylinder block cradle.
5. Remove the balance shaft.
^
Remove and discard the 4 Torx bolts.
^
Remove the drive chain tensioner.
^
Remove the tensioner blade.
Installation
