LR3 (LA) V6-4.0L (2006)
/v6-4.0l/Page-1913002.png)
^
Tighten the nut and bolt to 300 Nm (221 ft. lbs.).
^
Tighten the nuts to 63 Nm (46 ft. lbs.).
3. Install the wheel and tire. h Tighten the wheel nuts to 140 Nm (103 ft. lbs.).
Rear Air Shock Absorber
Rear Air Shock Absorber
Service Repair No - 64.30.02.45
Special Service Tools
Removal
1. NOTE: This procedure should also be used to remove the rear air spring.
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
Raise and support the vehicle.
2. Remove the wheel and tire.
3. Remove the shock absorber and spring assembly.
4. Remove the gaiter.
^
Remove and discard the 2 straps.
