LR3 (LA) V8-4.4L (2009)
Trunk / Liftgate Latch: Service and Repair
Liftgate Latch
Liftgate Latch
Service Repair No - 76.37.19
Removal
1. Remove the tailgate trim panel.
2. Release the liftgate latch.
^
Remove the 3 Torx screws.
3. Remove the liftgate latch.
^
Disconnect the electrical connector.
^
Release the liftgate latch to actuator cable.
Installation
1. Install the liftgate latch.
^
Attach the liftgate latch to actuator cable.
^
Connect the electrical connector.
^
Tighten the Torx screws to 10 Nm (7 lb.ft).
2. Install the tailgate trim panel.
3. Adjust the liftgate striker.