LR3 (LA) V8-4.4L (2009)
Installation
1. Install the fuel pump module.
^
Connect the fuel lines.
^
Secure with the strap.
^
Secure the fuel pressure regulator.
2. Install the fuel pump module access flange.
^
Clean the component mating faces.
^
Install a new seal.
^
Connect the 3 electrical connectors.
^
Connect the fuel supply line.
^
Connect the vent line.
CAUTION: Make sure the seal is correctly fitted.
NOTE: Align to the position noted on removal.
3. Secure the fuel pump module access flange.
^
Install the clamp.
^
Tighten the screw to 4 Nm (3 ft. lbs.).
4. Install the fuel tank.
5. Connect the battery ground cable.