Range Rover P38
LAND ROVER V8
15
REPAIR
9. Disconnect 8 injector multiplugs.
10. Disconnect fuel temperature sensor multiplug.
11. Disconnect fuel feed hose from fuel rail.
12. Disconnect fuel return hose from pressure
regulator pipe.
NOTE: Advanced EVAPS vehicles have a
threaded connection to the return hose.
13. Remove 6 nuts securing fuel rail and ignition coil
bracket to inlet manifold.
14. Release ignition coil bracket from inlet manifold
studs. Place aside.
15. Release injectors from inlet manifold and remove
fuel rail assembly.
Do not carry out further dismantling if
component is removed for access only.
16. Remove 8 clips securing injectors to fuel rail.
Remove injectors.
17. Remove 2 ’O’ rings from each injector and
discard.
18. Remove 2 screws securing fuel pressure
regulator to fuel rail.
19. Release return pipe from clip. Remove pressure
regulator assembly.
20. Remove ’O’ ring from fuel pressure regulator and
discard.
