Range Rover P38
LAND ROVER V8
1
REPAIR
AIR CLEANER ASSEMBLY - up to 97MY
Service repair no - 19.10.01
Remove
1. Release 2 clips securing air flow meter to air
cleaner.
2. Release air flow meter. Remove ’O’ ring and
discard.
3. Disconnect intake air temperature sensor.
4. Remove bolt securing air suspension dryer to air
cleaner.
5. Release dryer pipes from 2 clips. Position dryer
aside.
6. Remove 2 bolts securing air cleaner to valance.
7. Release air cleaner lug from valance grommet.
Remove air cleaner.
8. If necessary, remove intake air temperature
sensor.
9. Remove seal.
Refit
10. If removed, refit intake air temperature sensor
with seal to air cleaner. Tighten to
8 Nm (6
lbf.ft)
11. Position air cleaner assembly. Engage lug to
valance grommet. Secure with bolts.
12. Position air suspension dryer to air cleaner.
Secure with bolt. Tighten to
8 Nm (6 lbf.ft)
13. Engage dryer pipes to clips.
14. Connect multiplug to intake air temperature
sensor.
15. Fit new ’O’ ring to air flow meter.
16. Secure air flow meter to air cleaner with clips.
