Range Rover P38
LAND ROVER V8
47
REPAIR
Disassemble
13. Remove tank from cradle.
14. Disconnect and remove breather hose from
pressure sensor.
15. Disconnect feed and return pipes at tank unit
and remove pipes.
16. Remove tank unit locking ring using LRT-19-009.
WARNING: A quantity of fuel will be
retained in the unit. Care must be taken to
avoid excessive spillage during removal.
17. Remove tank unit using the lifting eye provided.
CAUTION: Do not lift the unit using the
feed and return stubs as this may damage
the stubs.
18. Remove tank unit sealing rubber and discard.
Reassemble
19. Fit new sealing rubber to tank unit.
20. Carefully fit tank unit and align aperture tab.
21. Tighten retaining ring to
35Nm (26lbf.ft) using
tool LRT-19-009.
22. Fit fuel pipes and engage to tank clips.
23. Fit breather hose to pressure sensor.
24. Position tank in cradle.
25. Position tank assembly to jack.
