Range Rover P38
LAND ROVER V8
33
REPAIR
PLENUM CHAMBER - 97MY to 99MY
Service repair no - 19.22.46
Remove
1. Remove battery cover and disconnect battery.
2. Loosen clip securing air intake hose to plenum
chamber.
3. Disconnect air intake hose from plenum
chamber.
4. Remove split pin and clevis pin securing throttle
cable to throttle linkage.
5. Remove split pin and clevis pin securing cruise
control cable to throttle linkage and release
cable adjuster from abutment bracket.
6. Remove ’C’ clip securing cruise control cable
abutment to bracket and position cable aside.
7. Release clip securing throttle cable abutment to
bracket and position cable aside.
8. Release clip securing harness to cable abutment
bracket and position aside.
9. Disconnect breather hose from plenum chamber.
10. Release clip and disconnect purge hose from
plenum chamber.
11. Disconnect multiplug from throttle potentiometer.
12. Disconnect multiplug from stepper motor.
13. Remove 6 bolts securing plenum chamber to
ram housing.
14. Release plenum chamber from ram housing.
15. Fit hose clamp to 2 plenum chamber coolant
hoses.
16. Position cloth to catch spillage.
