Range Rover (LM) V8-4.4L (2009)
Entertainment System Control Module: Service and Repair
Video System Module
Video System Module
Removal
1. Remove the LH loadspace trim panel.
2. Disconnect the 2 electrical connectors from the video system module.
3. Identify and disconnect the 2 coaxial cables.
4. Remove the video system module.
-
Remove the bolt.
Installation
1. Install the video system module.
-
Install the bolt and tighten to 10 Nm (7 lb.ft).
2. Connect the 2 coaxial cables.
3. Connect the 2 electrical connectors to the video system module
4. Install the LH loadspace trim panel.