Range Rover (LM) V8-4.4L (2009)
CAUTION: Make sure that all openings are sealed. Use new blanking caps.
NOTE: Position cloth to collect fluid spillage
2. Disconnect the pre-charge pump feed hose.
^
Release the clip.
CAUTION: Make sure that all openings are sealed. Use new blanking caps.
3. Remove the brake fluid reservoir.
^
Release the 2 clips
^
Remove and discard the 2 seals.
Installation
NOTE: Remove and discard blanking plugs
1. Install the brake fluid reservoir
^
Clean the component mating faces
^
Install new seals
NOTE: Remove and discard blanking plugs
2. Connect the pre-charge pump feed hose
^
Secure the clip