Range Rover (LM) V8-4.4L (2009)
Seat Belt Tensioner: Service and Repair
Rear Center Safety Belt Retractor
Rear Center Safety Belt Retractor
Removal
1. Remove the rear seat.
2. Remove the rear seat backrest cover.
3. Remove the rear center safety belt retractor.
^
Remove and discard the bolt.
Installation
1. Install the rear center safety belt retractor.
^
Install the new bolt and tighten to 25 Nm (18 ft. lbs.).
2. Install the rear seat backrest cover.
3. Install the rear seat.