Range Rover (LP) V8-4.0L (1999)
/v8-4.0l/Page-1264001.png)
Brake Fluid: Service and Repair
FLUID LEVEL CHECK/TOP UP
1. Park vehicle on level ground
2. Turn ignition ON, to activate hydraulic pump If pump does not operate depress brake pedal several times until pump operates.
3. When pump stops, check level is between 'MIN' and 'MAX' marks.
WARNING: Clean reservoir body and filler cap before removing cap. Use only fluid from a sealed container.
4. If level is below 'MIN' mark top up fluid level to 'MAX' mark on reservoir, using correct fluid. See LUBRICANTS, FLUIDS AND CAPACITIES,
Information.
