Range Rover (LP) V8-4.6L (2001)
/v8-4.6l/Page-1193001.png)
Level Control Solenoid Valve: Service and Repair
Solenoid Coil
SOLENOID COIL
NOTE: Solenoid "A" which has blue fly-leads, is not serviceable.
Remove
1. Remove valve block assembly, refer to See: Solenoid Valve Block and Drive Pack
2. Identify solenoid coil to be removed.
3. Disconnect solenoid coil multiplug.
4. Clean area around solenoid coil and valve block.
CAUTION: It is essential that no dirt or grease enters the system.
5. Remove 2 screws securing coil to valve block.
6. Release coil from valve block. Collect and discard '0' ring seal.
7. Remove face protector from connector.
