Range Rover Sport (LS) V8-4.2L SC (2006)
/v8-4.2l_sc/Page-1892002.png)
^
Attach the wiring harness to the 4 clips.
3. Secure the wheel speed sensor to the wheel knuckle.
Tighten the bolt to 9 Nm (7 ft. lbs.).
^
Attach the wiring harness to the clip.
4. NOTE: Make sure the electrical connector retaining clip is attached to the body wiring harness.
Connect the ABS sensor electrical connector.
^
Attach the wiring harness.
5. If a new wheel speed sensor has been installed, interrogate the ABS system using T4.
