Range Rover Classic
ZF
3
REPAIR
39. Remove transmission jack from transmission
assembly.
40. Remove front exhaust pipe. (Tdi only)
41. Carefully lower transmission until top of transfer
gearbox clears rear passenger footwell.
42. Position transmission jack under engine to
support weight while bell housing bolts are
removed.
43. Remove bell housing bolts, note that one bolt
secures gearbox dip stick tube.
44. Withdraw transmission assembly from engine,
ensuring torque converter is removed with
gearbox.
Refit
45. Refitting gearbox is reverse of removal
instructions, noting following points.
46. Coat drive plate to torque converter bolts with
Loctite 270.
47. Tighten all bolts to specified torque.
See
Specifications, torque, Torque Values
48. Fit new exhaust gaskets to torque.
49. Refill gearbox with correct grade and quantity of
oil
See LUBRICANTS, FLUIDS AND
CAPACITIES, Information, Recommended
fluid and lubricants
