ES 350 V6-3.5L (2GR-FE) (2007)
-
*6: From 2nd Master Cylinder
c. Using SST, fully tighten each brake line.
SST 09023-00101
Torque:
without SST 15 N.m (155 kgf.cm, 11 ft.lbf)
with SST 14 N.m (143 kgf.cm, 10 ft.lbf)
NOTE:
-
Use a torque wrench with a fulcrum length of 250 mm (9.84 in.).
-
This torque value is effective when SST is parallel to a torque wrench.
d. Connect the brake actuator connector.
NOTE: Make sure that the connector is locked securely.
2. INSTALL RADIATOR RESERVE TANK ASSEMBLY
a. Install the radiator reserve tank assembly.