ES 350 V6-3.5L (2GR-FE) (2007)
Standard resistance
INSTALLATION
1. INSTALL ATF TEMPERATURE SENSOR ASSEMBLY
(a)
Coat a new O-ring with ATF and install it to the ATF temperature sensor assembly.
(b) Coat the 4 bolts with ATF.
(c)
Install the ATF temperature sensor assembly and clamp to the valve body with the 4 bolts.
Torque: 11 N*m (112 kgf*cm, 8 ft.*lbf)
Bolt length:
Bolt A: 25 mm (0.98 in.)
Bolt B: 85 mm (3.35 in.)
(d) Connect the connector.
2. INSTALL VALVE BODY OIL STRAINER ASSEMBLY
3. INSTALL AUTOMATIC TRANSAXLE OIL PAN SUB-ASSEMBLY
4. INSTALL AUTOMATIC TRANSAXLE ASSEMBLY