ES 350 V6-3.5L (2GR-FE) (2007)
4. REMOVE ATF TEMPERATURE SENSOR ASSEMBLY
(a)
Disconnect the connector.
(b) Remove the 4 bolts, ATF temperature sensor assembly and clamp from the valve body.
(c)
Remove the O-ring from the ATF temperature sensor assembly.
INSPECTION
1. INSPECT ATF TEMPERATURE SENSOR ASSEMBLY
(a)
Measure the resistance according to the value(s) in the table below.
Standard resistance
HINT: If the resistance is out of the specified range with the ATF temperature shown in the table below, the driveability of the vehicle may
decrease.