ES 350 V6-3.5L (2GR-FE) (2007)
(b) Using a screwdriver, remove the O-ring from the vane pump rear housing.
HINT: Tape the screwdriver tip before use.
6. REMOVE VANE PUMP SHAFT WITH PULLEY
(a)
Using 2 screwdrivers, remove the vane pump shaft snap ring from the vane pump shaft with pulley.
(b) Remove the vane pump shaft with pulley.
7. REMOVE VANE PUMP ROTOR
(a)
Remove the 10 vane pump plates.
(b) Remove the vane pump rotor.
8. REMOVE VANE PUMP CAM RING
(a)
Remove the vane pump cam ring from the vane pump front housing.