ES 350 V6-3.5L (2GR-FE) (2007)
9. REMOVE VANE PUMP FRONT SIDE PLATE
(a)
Remove the vane pump front side plate from the vane pump front housing.
(b) Using a screwdriver, remove the O-ring from the vane pump front side plate.
HINT: Tape the screwdriver tip before use.
(c)
Remove the O-ring from the vane pump front housing.
10. REMOVE VANE PUMP HOUSING OIL SEAL
(a)
Using a screwdriver and a shop rag or a piece of cloth, remove the vane pump housing oil seal.
NOTICE: Be careful not to damage the vane pump front housing.
INSPECTION