ES 350 V6-3.5L (2GR-FE) (2007)
(b) Turn the engine switch on (IG) and turn the intelligent tester on.
(c)
Following the display on the intelligent tester, perform the ACTIVE TEST.
MAIN BODY
Pinout Values and Diagnostic Parameters
TERMINALS OF ECU
1. STEERING LOCK ACTUATOR ASSEMBLY (STEERING LOCK ECU)
Programming and Relearning
INITIALIZATION
HINT: In vehicles equipped with the smart access system with push-button start function, the starting function may not operate after recharging or
while jump-starting a discharged battery. This condition is most common if the battery voltage drops below 9 V. The following procedure has been
developed to address this condition.