GS 300 RWD V6-3.0L (3GR-FSE) (2006)
7. REMOVE VALVE BODY OIL STRAINER ASSEMBLY
a. Remove the 4 bolts and oil strainer.
NOTICE: Be careful as some fluid will come out of the oil strainer.
b. Remove the O-ring from the oil strainer.
8. DISCONNECT TRANSMISSION WIRE
a. Remove the bolt and lock plate, and separate the ATF temperature sensor.
b. Remove the 2 bolts and disconnect the 2 clamps.
c. Disconnect the 9 connectors from the solenoid valves.
9. REMOVE TRANSMISSION WIRE
a. Disconnect the transmission wire connector.
b. Remove the bolt and pull out the transmission wire.