GS 300 RWD V6-3.0L (3GR-FSE) (2006)
/Page-1111004.png)
c. Remove the O-ring from the transmission wire.
INSPECTION
1. INSPECT TRANSMISSION WIRE
Standard Resistance
a. Using an ohmmeter, measure the resistance between the terminals.
INSTALLATION
1. INSTALL TRANSMISSION WIRE
a. Coat a new O-ring with ATF and install it to the transmission wire.
b. Install the transmission wire with the bolt.
Torque: 5.4 Nm (55 kgf-cm, 48 inch lbs.)
c. Connect the transmission wire connector.
