GS 350 RWD V6-3.5L (2GR-FSE) (2007)
(1)
Check that the camshafts are in the neutral position shown in the illustration.
(2)
Uniformly loosen and remove the 8 camshaft bearing cap M6 bolts in the sequence shown in the illustration.
HINT:
Keep the camshaft horizontal while loosening the bearing cap bolts.
(3)
Uniformly loosen and remove the 8 camshaft bearing cap M8 bolts in the sequence shown in the illustration.
(4)
Remove the 5 camshaft bearing caps.
31.
Remove the No. 2 camshaft.