GS 350 RWD V6-3.5L (2GR-FSE) (2007)
/Page-506001.png)
Camshaft Bearing: Specifications
CAMSHAFT BEARING CAP (for Bank 1)
Uniformly install the 9 bolts in several steps in the order shown in the illustration.
Torque ....................................................................................................................................................................... 10 N*m (102 kgf*cm, 7 ft.*lbf)
CAMSHAFT BEARING CAP (for Bank 2)
Uniformly install the 8 bolts in several steps in the order shown in the illustration.
Torque ....................................................................................................................................................................... 10 N*m (102 kgf*cm, 7 ft.*lbf)
