GS 350 RWD V6-3.5L (2GR-FSE) (2007)
(5)
Tighten the 8 M8 bolts in the sequence shown in the illustration.
Torque: 28 N.m (286 kgf.cm, 21 ft.lbf)
(6)
Tighten the 8 M6 bolts to their final torque value in the sequence shown in the illustration.
Torque: 16 N.m (163 kgf.cm, 12 ft.lbf)
B.
RH bank:
(1)
Clean the camshaft bearing caps and apply engine oil.
(2)
Make sure that the valve rocker arms are properly installed with each lash adjuster and valve stem cap.
(3)
Make sure of the marks and numbers on the camshaft bearing caps and temporarily tighten the 16 bolts.
(4)
Tighten the 9 M6 bolts in the sequence shown in the illustration.
Torque: 10 N.m (102 kgf.cm, 7 ft.lbf)
(5)
Tighten the 9 M8 bolts in the sequence shown in the illustration.